Philips 200P6IS/00 Service Manual page 57

GENERAL PRODUCT SPECIFICATION(Continued)
3.1 Interface signals
The input signals can be applied in three different modes :
(1). D-Sub Analog
Input signal
: Video, Hsync., Vsync
: 0.7 Vp-p, input impedance, 75 ohm @DC
Video
Sync. : Separate sync
Hsync
Vsync
Composite sync TTL level, input impedance 5k ohm terminate(Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
(2). DVI_A: analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
(3). DVI_D: digital TMDS input
(4). CVBS Video :1Vp-p,75 Ohm
(5). S-Video :Y-1Vp-p,75 Ohm C-0.3Vp-p,75 Ohm
3.1.1 Audio Electrical Performance
3.1.1 Audio
Input signal level: 500mVrms(for lime green audio phone jack) 300mVrms(for R/L RCA audio pin jacks) Input
signal connector: 3.5 mm mini jack (lime green) R/L RCA jacks (red for right side/white for left side)
Loudspeaker (Impedance: 16 Ohm+/- 15%): 2W+2W stereo for RMS Power
Frequency range: 250Hz - 13KHz
Headphone connector: 3.5mm mini jack (black)
Headphone connection will mute speakers
PC audio cable
Length
Interface
3.2
3.2.1 D-Sub Cable
Length
Connector type
pin assignment :
PIN No. SIGNAL
1 Red
Green/ SOG
2
3 Blue
4 Sense (GND)
Cable detect
5
6 Red GND
7 Green GND
8 Blue GND
9 DDC +5V
10 GND
Sense (GND)
11
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock
20.1 inch TFT UXGA LCD Monitor
TYPE
BRAND : PHILIPS
2005-03-11
JERRY CHEN
TTL level , input impedance 2.2k ohm terminate
Positive/Negative
Positive/Negative
: 1.8 M +100/- 0 mm (fixed)
: 1.8 M +100/- 0 mm (fixed)
: D-Sub male with DDC2B pin assignments.
Blue connector thumb-operated jack screws
: 200P6IS/00
2005-03-11
8639 000 16316
17 590 4
200P6 LCD 57
Go to cover page