Ac Receptacle Selection; Power Producing Circuits - Honda DS-2CC102P(N)-IRT Owner's Manual

AC Receptacle Selection

The control panel, shown below, has a voltage selector switch and four
receptacles. Receptacle 4, the 240-volt receptacle, has two powered
terminals, 4A and 4B.
RECEPTACLE ①
VOLTAGE SELECTOR SWITCH

Power Producing Circuits

This generator is equipped with two power generating circuits. When
the voltage selector switch is in the 120 V/240 V position, each of the
two power producing circuits supplies power to specific receptacles.
When the voltage selector switch is in the 120 V ONLY position, the
power producing circuits operate in parallel, sharing the total load
connected to terminal 4A and receptacles 1, 2, and 3.
POWER
CIRCUIT 1
POWER
CIRCUIT 2
RECEPTACLE ②
GFCI RECEPTACLE
〔
(120 V 20 A DUPLEX RECEPTACLE)
120 V/240 V
〕
RECEPTACLE ③
GFCI RECEPTACLE
〔
(120 V 20 A DUPLEX RECEPTACLE)
TERMINAL
120 V ONLY
POWER CIRCUIT 2
POWER CIRCUIT 1
OPERATION
〕
RECEPTACLE ④
TERMINAL
41