Bosch PSM VENTARO 1400 Operating Instructions Manual page 19

OBJ_BUCH-39-003.book Page 19 Tuesday, November 28, 2006 11:31 AM
Using the Extraction/Inflation Nozzle
(see figure E)
The extraction/inflation nozzle 21 can be used for vac-
uuming areas that are difficult to access or for inflating
suitable objects.
Insert the vacuum hose 3 with the extraction adapter 20
mounted into the extraction/inflation nozzle 21.
You can regulate the air flow at the tip of the nozzle by
covering the bore at the side of the nozzle with your fin-
ger or leaving it open.
Maintenance and Service
Maintenance and Cleaning
Switch off the vacuum cleaner before
attempting to carry out any work on it or on
the sander.
For safe and proper working, always keep the
vacuum cleaner and the multi sander as well
as their ventilation slots clean.
Regularly check the filling level of the dust bag 18 and
replace the dust bag in time to ensure optimal vacuum-
ing performance. When using the multi sander, replace
the dust bag as soon as the sanding performance
decreases.
If the multi sander or vacuum cleaner should fail despite
the care taken in manufacturing and testing proce-
dures, repair should be carried out by an after-sales
service centre for Bosch power tools.
In all correspondence and spare parts orders, please
always include the 10-digit order number given on the
nameplate of the multi sander or vacuum cleaner.
WARNING! Important instructions for connecting
a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the fol-
lowing code:
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it must be
disposed of safely.
1 609 929 J33 • 28.11.06
Service and Customer Assistance
Exploded views and information on spare parts can be
found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
✆ Service:. . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 82
✆ Advice line:. . . . . . . . . . . . +44 (0) 18 95 / 83 87 91
Fax: . . . . . . . . . . . . . . . . . . . . +44 (0) 18 95 / 83 87 89
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
✆ Service:. . . . . . . . . . . . . . . . .+353 (0)1 / 4 66 67 00
Fax: . . . . . . . . . . . . . . . . . . . . . .+353 (0)1 / 4 66 68 88
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
✆ . . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 44
Fax: . . . . . . . . . . . . . . . . . . . . +61 (0)1 / 3 00 30 70 45
www.bosch.com.au
Disposal
Multi sanders or vacuum cleaners, accessories and
packaging should be sorted for environmental-friendly
recycling.
Only for EC countries:
Do not dispose of multi sanders or vac-
cum cleaners into household waste!
According to the European Directive
2002/96/EC on waste electrical and
electronic equipment and its incorpora-
tion into national law, multi sanders or
vacuum cleaners that are no longer suitable for use
must be seperately collected and sent for recovery in
an environmental-friendly manner.
Subject to change without notice.
English | 19