Powering On The Projector; A Pin Code Input Screen Appears - Panasonic PT-TW342 Operation Instructions Manual

Powering On the Projector

Before switching on the projector, make sure all the other devices are correctly connected. (x page 30)
AC IN
2) 1)
1) Connect the power cord to the projector body.
2) Connect the power plug to an outlet.
f The power indicator <ON(G)/STANDBY(R)> lights in red, and the projector will enter the standby mode.
3) Press the power <v/b> button on the control panel or on the remote control.
f The power indicator <ON(G)/STANDBY(R)> blinks in red, after a while the indicator lights in green. (The factory default
setting of [Standby mode] is [Eco].)
f The startup display appears on the screen and the count down starts, and the image will be projected on the screen
after the countdown.
Note
f During count down, all the buttons are not available except for the power <v/b> button.
f If [Standby mode] is set to [Normal], the power indicator <ON(G)/STANDBY(R)> lights in green when powering on the
projector.

A PIN code input screen appears

If the [PIN code] of the projector has been set, the PIN code input screen will be displayed after the completion of the startup
display. Please enter a PIN code as the following steps.
1) Press the <ENTER> button.
2) Press as to select the number from 0 to 9.
3) Press the <ENTER> button.
f The fixed number changes to , and the cursor moves to the next frame.
4) Repeat the above steps to enter a three-digit number.
f Move the cursor to [Set] when fixed a three-digit number.
5) Press the <ENTER> button.
f The image will be projected on the screen.
Note
f When [PIN code lock] is set to [On] in [Security] menu, the PIN code input screen will be displayed after startup display. The
projector will turn off automatically when input an incorrect PIN code or without any operation within 3 minutes.
f If you want to correct the digit, press the <MENU> button to reset the digit and then re-enter it.
f Press the <ENTER> button after moving the cursor to [Cancel] to reset the all digits.
f If you entered an incorrect digit, the digit () will turn red and reset, and then re-enter a digit.
f The initial PIN code is "111".
Chapter 3 Basic Operations - Powering on/off
3)
3)
ENGLISH - 35