Table of Contents
Advertisement
Input menu
To select the input source directly by pressing the input selection buttons on the remote control or to select the
input source in the Input screen by pressing the <INPUT/ENTER> button on the control panel.
Switching the input source
When using the remote control
1)
Press the input selection (<COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <MEMORY VIEWER/
USB DISPLAY/NETWORK>) buttons.
f The selected input signal will be projected.
<COMPUTER 1>
<COMPUTER 2>
<HDMI>
<VIDEO>
<MEMORY VIEWER/
USB DISPLAY/
NETWORK>
When using the control panel
1)
Press the <INPUT/ENTER> button.
f The Input screen is displayed.
2)
Press as to select one item and then press the <ENTER> button.
f The selected input signal will be projected.
Note
f The still-image transmission application software "Presenter Light" (x page 83) or "VueMagic" (x page 84) is
necessary while projecting [Network] input.
48 - ENGLISH
Chapter 4 Settings - Input menu
Press this button to switch to Computer 1/Component input.
Switch to Computer 2 input.
Switch to HDMI input.
Press this button to switch to Video/S-video input.
Press this button to switch to Memory Viewer/USB Display/Network input.
Advertisement
Table of Contents
