Technical Specifications - Denon DN-X600 Service Manual

TECHNICAL SPECIFICATIONS

n Audio
• PHONO inputs
Input impedance:
Level:
Signal to Noise ratio:
• CD inputs
Input impedance:
Level:
Signal to Noise ratio:
• Equalizer (LINE)
Channel EQ Adjustment
Range:
• AUX1 Input
Input impedance:
Level:
• EFX RETURN AUX2 inputs
Input impedance:
Level:
• MIC inputs
MIC:
Input impedance:
Level:
EIN:
CMRR:
• Equalizer (MIC/AUX1)
Adjustment Range:
• USB audio inputs
• MASTER output Balanced:
DA converter:
Load impedance:
Level:
Frequency response:
THD:
Crosstalk:
Unbalanced:
Load impedance:
Level:
• EFX SEND/BOOTH Output
Load impedance:
Level:
(0 dBu=0.775 Vrms,
0 dBV =1 Vrms)
2 Stereo
Unbalanced RCA terminal
47 kΩ
–40 dBV(10 mV)
89 dB
2 Stereo
Unbalanced RCA terminal
10 kΩ
0 dBV
100 dB
3 Band
HI (High Range) :
–∞, –90 dB – +10 dB
MID (Medium Range) :
–∞, –90 dB – +10 dB
LOW (Low Range) :
–∞, –90 dB – +6 dB
1 Stereo RCA Terminal
10 kΩ
0 dBV
1 Stereo RCA Terminal
10 kΩ
AUX2:0 dBV
EFX RETURN:–10 dBV
Monaural
Balanced XLR
(1: Ground, 2: Hot, 3: Cold)
5kΩ
–60 – +20 dBu
-126 dBu or less
(Rs=150Ω)
89 dB or more (1 kHz)
2 Band
HI (High Range) :–15 – +15 dB
LOW (Low Range) :–15 – +15dB
4 Stereo(8 Monaural) 24 bit,
Fs:44.1/48/96 kHz
USB B
Stereo, balanced XLR terminal
(1: Ground, 2: Hot, 3: Cold)
32 bit 128-times oversampling
advanced segment
Over 600 Ω
+ 4 dBu (Max + 24 dBu)
20 Hz – 20 kHz(±0.5 dB)
Less than 0.05%
Less than –100 dB (1 kHz)
Stereo RCA terminal
10 kΩ
0 dBu (Max + 20dBu)
Stereo RCA terminal
10 kΩ or more
BOOTH: 0dBu (Max + 20dBu)
EFX SEND:–10dBV
(Max +10dBV)
• Headphone output
Load impedance:
Level:
• USB audio output
n General
USB MIDI I/O:
CH Meter:
MASTER Meter:
CH Fader:
Cross Fader:
• Power supply:
U.S.A. and Canada models:
European,U.K. and Asia/
Pacifi c models:
Power consumption:
Operating temperature:
Operating humidity:
Storage temperature:
n Dimensions
Width:
Height:
Depth:
Weight:
DIMENSION
250 mm
4
Stereo
40 Ω
100 mW
4 Stereo(8 Monaural) 24bit,
44.1/48/96 kHz
USB B
IN:1ch, OUT:1ch MIDI1.0, MIDI
Clock USB B
PPM 10 Point LED-20 – + 10
dB, Peak
PPM 10 Point LED-20 – + 10
dB, Peak
45 mm Slim Type fader
45 mm FLEX Fader
(Fader Torque Adjustable)
AC 120 V, 60 Hz
AC 230 V, 50 Hz
24 W
(Less than 0.3 W during standby)
+5 °C – +35 °C
25 % – 85 %
–20 °C – 60 °C
250 mm
315 mm
90 mm
4.0 kg
90 mm
112 mm