Start-Up Checks; Low Oil Pressure-Alert; Overheat Alert - Yamaha F40F Owner's Manual

Instruments and indicators
sensor to the unit. For the optional sensor,
consult your Yamaha dealer. The tachome-
ter unit is available in round or square types.
Check your tachometer unit type.
1
1. Set button
2. Mode button
5
4
7
6
8
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
EMU36190

Start-up checks

Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to
" " (on). After all the displays come on and
the total hour display comes on, the gauge
30
2
ZMU05415
1
2
3
ZMU05416
will change to normal operation. If the buzzer
sounds and the water separator-alert indica-
tor blinks, consult your Yamaha dealer im-
mediately.
TIP:
To stop the buzzer, press the "
" " (mode) button.
EMU36210

Low oil pressure-alert

If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatical-
ly decrease to about 3000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
tor blinks. Check the engine oil quantity and
replenish oil if necessary. If the alert device
has activated while the appropriate engine
oil quantity is maintained, consult your
Yamaha dealer.
ECM01601
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activat-
ed. Serious engine damage will occur.
EMU36140

Overheat alert

If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 3000 r/min.
" (set) or
ZMU05430