Operation
Yamaha dealer.
EMU34581
Power trim and tilt system
EWM01930
WARNING
Never get under the lower unit while it
●
is tilted, even when the tilt support lever
is locked. Severe injury could occur if
the outboard motor accidentally falls.
Body parts can be crushed between the
●
motor and the clamp bracket when the
motor is trimmed or tilted.
Be sure no one is near the outboard
●
motor before performing this check.
1.
Check the power trim and tilt unit for any
sign of oil leaks.
2.
Operate each of the power trim and tilt
switches to check that all switches work.
3.
Tilt the outboard motor up and check
that the trim and tilt rod is pushed out
completely.
42
1. Trim and tilt rod
4.
Check that the trim and tilt rod is free of
corrosion or other flaws.
5.
Tilt the outboard motor down. Check
that the trim and tilt rod operates
smoothly.
EMU36581
Battery
Check that the battery is in good condition,
and fully charged. Check that the battery
connections are clean, secure and covered
by insulating covers. The electrical contacts
of the battery and cables must be clean and
properly connected or the battery will not
start the engine.
Refer to the battery manufacturer's instruc-
tions for checks for your particular battery.
EMU27436
Filling fuel
EWM01830
WARNING
Gasoline and its vapors are highly flam-
●
mable and explosive. Always refuel ac-
cording to this procedure to reduce the
risk of fire and explosion.
Gasoline is poisonous and can cause
●
injury or death. Handle gasoline with
care. Never siphon gasoline by mouth.
If you should swallow some gasoline or
inhale a lot of gasoline vapor, or get
1
ZMU06402