Specifications And Requirements; Specifications - Yamaha F40F Owner's Manual

EMU35950

Specifications

TIP:
"*" means, select the engine oil referring to
the chart of engine oil paragraph. For further
information, see page 12.
EMU2821D
Dimension:
Overall length:
F40FEHD 1362 mm (53.6 in)
F40FEHT 1362 mm (53.6 in)
F40FET 717 mm (28.2 in)
Overall width:
384 mm (15.1 in)
Overall height L:
1350 mm (53.1 in)
Transom height L:
536 mm (21.1 in)
Weight (without propeller) L:
F40FEHD 102.7 kg (226 lb)
F40FEHT 104.6 kg (231 lb)
F40FET 99.6 kg (220 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Maximum output:
29.2 kW@5500 r/min
(40 HP@5500 r/min)
Idling speed (in neutral):
800 ±50 r/min
Engine:
Type:
4-stroke L
Displacement:
3
747.0 cm
Bore × stroke:
65.0 × 75.0 mm (2.56 × 2.95 in)
Ignition system:
CDI
Spark plug (NGK):

Specifications and requirements

Drive unit:
Fuel and oil:
DPR6EB-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Control system:
F40FEHD Tiller
F40FEHT Tiller
F40FET Remote control
Starting system:
Electric
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance (cold engine) EX:
0.25–0.35 mm (0.0098–0.0138 in)
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
Maximum generator output:
17.0 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (26/13)
Trim and tilt system:
F40FEHD Hydro tilt
F40FEHT Power trim and tilt
F40FET Power trim and tilt
Propeller mark:
G
Recommended fuel:
Regular unleaded gasoline
Min. research octane:
90
Fuel tank capacity:
24 L (6.34 US gal, 5.28 Imp.gal)
Recommended engine oil:
4-stroke outboard motor oil
9