Elo Touch Solutions PayPoint User Manual page 8

Power
Press the register power button to turn the Elo PayPoint Register on. Press and hold power
button when the register is on to bring up the Shut Down option screen.
In the event that the register freezes and does not respond, press and hold the power button
until the register turns off. If the register does not turn off via the power button, the register will
need to be powered down by unplugging the power cord from the wall.
The Elo PayPoint Register power button is equipped with an LED that indicates the power
status of the register, as follows:
Register Power Status LED Status
OFF (disconnected from wall) Off
OFF (connected to wall) Red
SLEEP Blinking white light
ON Solid white light
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications available on the Elo website
www.elotouch.com.
To bring register out of sleep/standby mode, press the power button once.
If long periods of non-use are planned, turn off the Elo PayPoint Register to save power.
The maximum voltage, frequency and current for the register, are provided in the power ratings
table below:
Operating Voltage Operating Operating Current
Range Frequency Range Range
Elo PayPoint Register 100 - 240Vac 50 – 60 Hz 0.1 – 0.3 Aac
®
User Manual: Elo PayPoint
SW602253 Rev B, Page 8 of 20