Elo Touch Solutions PayPoint User Manual page 14

Figure 4. View of receipt printer when printer head cover is open (left). View of the receipt
Prior to cleaning the PayPoint Register receipt printer, ensure that the register display head is
flipped away from the receipt printer (in customer-facing view). Push the receipt printer head
release button to release printer head cover and access the different printer components listed
in Figure 4 above. Guidance on how to clean the printer photo-sensor, thermal head, and roller
are as follows:
1. Roller
It is recommendable to clean the printer roller once a month. To do so:
a. Apply isopropyl alcohol onto a cloth.
b. Wipe off any stain from the printer roller with the alcohol dampened cloth.
c. Use a dry soft cloth to wipe the roller.
d. Wait to allow the roller to dry off, and then shut the printer head cover.
2. Photo-sensor:
It is recommendable to clean the printer photo-sensor once a month. To do so:
a. Use a Nylon brush (or equivalent) to brush off any paper dust or other residues
that may be on the photo-sensor.
3. Thermal head
printer according to the view denoted by the arrow.
®
User Manual: Elo PayPoint
SW602253 Rev B, Page 14 of 20