Installation Instructions dishwashers SAVE ANd REAd ThESE INSTRUCTIONS TESTEd IN ACCORdANCE wITh ThE LATEST EdITION OF ANSI/UL 858-2001 ANd CAN/CSA-C22.2 NO. 64 STANdARd FOR hOUSEhOLd ELECTRIC COOkINg ANd LIqUId hEATINg APPLIANCES. CONVENTIONS USEd IN ThESE INSTRUCTIONS wARNINgS: Must be followed carefully to avoid personal injury or damage. NOTES: Contain helpful hints and tips to facilitate the installation.
Use only the use an open flame during this dimensions and specifications time. indicated in dacor dishwasher 11. Remove the door to the literature. washing compartment when Read all of the Use and Care...
26 7/8" (683mm) Planning Installation of damage to the power cord. If the power cord is damaged it must be replaced by a Dacor Authorized Service Agent, or similar qualified IMPORTANT: person, in order to avoid a hazard. The power...
Planning the drain • do not push down on the door It is important to level the dishwasher from left to right and front to back. Shimming may be when open, doing so can result required on extremely uneven flooring materials. IMPORTANT: in serious injury or cuts and If shims are needed, place the shim(s) under the...
Installing Custom door Front Panel If necessary door counterbalance adjustment Method 2 - high drain loop with waste tee or can be accomplished by, adjusting the disposer. (Id Model Only) counterbalance screws located at the bottom Fasten to underside of the chassis to the left and right of the rear Maximum Maximum of countertop...
If necessary, screw contact with any dishwasher components. and contact the local authorized Dacor holes are provided through the front toe-kick service agent. plate for material mounting. Adjust the toe-kick ...