Grinder Blades - Saeco New Royal HD 8930 Service Manual

NEW ROYAL
7.3.

Grinder blades

A
To slide out the upper grinder support turn the nut (A)
anticlockwise until it is released.
Loosen the screw as illustrated and slide out the lower
grinder. When re-assembling take care to replace the
three springs and three balls correctly.
A
1
Saeco International Group
Services Unlimited, Inc./ Parts Guru
To adjust the distance between the grinders
- reconnect the coffee grinder and switch on
- turn the adjusting ring (A) slowly clockwise until the two
grinders touch each other
- turn the adjusting ring (A) anticlockwise one notch.
2
Rev. 01
1
Lower grinder (1) and
upper grinder (2).
A
Release the upper grinder lid by pressing
on the fi ns as illustrated (A) and remove
the grinder by unhooking the catches as
illustrated (B).
When reassembling the adjusting lever (1)
position it in the center (2) and tighten the
screw as illustrated.
07 DISASSEMBLY
2
B
Page 02 / 09