Error Alerts - Godex DT2 User Manual

3-5. Error alerts

LED
Beeps
indicator
Red 2 x 4 beeps
Red
None
(flashing)
Red 2 x 2 beeps
Red 2 x 2 beeps
Red 2 x 2 beeps
Red 2 x 2 beeps
Red 2 x 2 beeps
DT2 / DT4 User Manual
Description
The print mechanism is not
correctly closed.
High temperature at the print
head.
No paper is detected.
The paper is finished.
Paper feed problem.
The memory is full. The printer
prints the message "Memory
full".
Unable to find file. The printer
prints the message "Filename
cannot be found".
A file of the same name already
exists. The printer prints the
message "Filename is repeated".
15
Solution
Open the print mechanism and close
it again.
Once the print head has cooled
down, the printer switches to
standby mode.
Make sure that the label sensor is
positioned correctly. If the sensor
still does not detect the paper, run
the auto-detection function
again.
Replace the label roll.
Possible reasons: the print medium
has become trapped around the
rubber roll; the sensor cannot detect
a gap or black mark between the
labels; there is no paper. Please
reset the sensor.
Delete unnecessary data or install
additional memory.
Use the "~X4" command to print all
files. Then check whether the files
exist and whether the names are
correct.
Change the name of the file and try
storing it again.