HP ENVY m7 Maintenance And Service Manual page 76

b. Rotate the display panel out of the enclosure (2) to gain access to the display cable connection on
the back of the panel.
c. On the back of the display panel, release the adhesive strip (1) that secures the display panel cable
to the display panel, and then disconnect the cable (2).
d. Remove the display panel from the computer (3).
4. To remove the display hinges:
a. Remove the eight Phillips PM2.5×3.5 screws (1) (four per hinge) that secure the hinges to the sides
of the display enclosure.
b. Remove the six broadhead Phillips PM2.0×3.0 screws (2) (three per hinge) that secure the hinges
to the bottom of the display enclosure.
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts