HP ENVY m7 Maintenance And Service Manual page 45
Models 17-n000 17-n099
Hide thumbs
Also See for ENVY m7:
- Maintenance and service manual (124 pages) ,
- Maintenance and service manual (130 pages) ,
- Maintenance and service manual (78 pages)
Table of Contents
Advertisement
3.
Lift up on the hard drive tab (3) to remove the hard drive assembly from the hard drive bay.
4.
If it is necessary to disassemble the hard drive, perform the following steps:
a.
Remove the four Phillips PM2.5×3.0 screws (1) that secure the hard drive brackets to the hard
drive.
b.
Disconnect the hard drive connector cable (2) from the hard drive.
Reverse this procedure to install the RTC battery.
Component replacement procedures
37
Advertisement
Table of Contents
