Elation E SPOT III User Manual page 19

EDIT PROGRAM – Record Controller – Working With Built In Programs [continued]
3. Program Selection for Auto Pro Part
"Edit Program".
ENTER to confirm.
"Select Programs".
ENTER to confirm.
elect "Auto Pro Part 1", "Auto Pro Part 2" or "Auto Pro Part 3", and select which
Slave program is to be sent. Selection "Part 1" means, that the Slave unit runs the
same program as the master units.
ENTER to confirm.
MODE/ESC in order to return to the main menu.
4. Program Selection for Edit Program
Edit Program".
ENTER to confirm.
"Edit Program".
ENTER to confirm.
elect the desired program. With this function you can edit specific scenes into a
specific program.
ENTER to confirm.
MODE/ESC in order to return to the main menu.
5. Automatic Scene Recording
"Edit Program".
ENTER to confirm.
"Edit Scenes".
desired scene numbers. A maximum of 250 scenes can be programmed.
ENTER to confirm.
MODE/ESC in order to return to the main menu.
w w w . e l a t i o n l i g h t i n g . c o m
19
E SPOT III™ User Manual