Elation E SPOT III User Manual page 17

w w w . e l a t i o n l i g h t i n g . c o m
PERSONALITY - Status Settings – Dimmer Mode
Select desired DIMMER MODE (Standard, Stage, TV, Architectural, Theatre).
EFFECT ADJUST – Test Channel
Select and auto test each individual channel function independently from the DMX
control board.
EFFECT ADJUST – Manual Control
Select and manually test and fine adjust each individual channel function
Independently from DMX control board. This function will center PAN and TILT motors
and set dimmer to 100%. PAN and TILT functions will still operate if the fixture needs to
be positioned to a flat clear surface. With the individual functions, you can focus the
light on a flat surface (wall) and perform fine adjustments.
EFFECT ADJUST – Calibration
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION.
This function allows small adjustments to be made to the effect wheels to compensate
for ware or in the event a sensor has been knocked slightly out of place. Because
improper use of this function can result in undesired operation this function has been
password protected. The password is 050 and must be entered each time the
calibration menu function is entered. Because calibration is an extremely delicate
procedure, instructions on performing this action are left out of this manual. For a first
time calibrator, please contact our customer support team for step-by-step instructions.
17
E SPOT III™ User Manual