Hitachi NT 65GB Technical Data And Service Manual page 48

(2) Disassembly and reassembly of the magazine cover ass'y, nail feeder, and related parts
(See Fig. 42.)
[Tools required]
• Phillips screwdriver
• Roll pin puller (2.5 mm (0.098") dia.) (3 mm (0.12") dia.)
(a) Disassembly
• Remove the nail feeder and the Nail Rail [97] by hand.
• Remove the Machine Screw M5 x 15 (Black) [88] and Tapping Screw (W/Flange) D4 x 20
(Black) [57]. The Magazine [99] can now be removed.
• Remove the Tapping Screw (W/Flange) D4 x 12 (Black) [96].
The Controller [95] can now be removed.
• Use the roll pin puller to pull out the Roll Pin D2.5 x 26 [98] and Roll Pin D3 x 16 [89] from Nail
Feeder (B) [91].
Nail Feeder (A) [92], Stopper Spring (C) [93] and the Ribbon Spring [90] can now be
removed.
• Remove the Tapping Screw (W/Flange) D3 x 10 (Black) [103] and Pushing Stopper Cover (B)
[102].
The Pushing Stopper Spring [101] and Pushing Stopper (B) [100] can now be removed.
-45-