Planet vrt-420n User Manual page 47

802.11
Hide thumbs Also See for vrt-420n:
Table of Contents

Advertisement

Bandwidth Settings:
Please adjust your bandwidth type according to your bandwidth (download/upload) subscribed
from your ISP. Due to the unstable nature of network bandwidth supported by ISP, users are
recommended to reserve a portion of bandwidth for buffering usage, and QoS would then
arrange the reserved bandwidth under heavy traffic.
Bandwidth Type
(Download/Upload)
Download Bandwidth
Upload Bandwidth
Reserved Buffering
Bandwidth
5.Advanced Setting Example
A user subscribed 10M/2Mbps bandwidth from ISP. After performing some speed test, the user
found that the actual bandwidth is about 1135KByte/sec downloading and 200KByte/s
uploading. We change the dimension in Kbps as follows,
Upload Speed: 200KB/s x 8 = 1600Kbp/s
The settings can be done as below,
Bandwidth Type
(Download/Upload)
Upload Bandwidth
Reserved Buffering
Bandwidth
Select the correct bandwidth type according to your Internet service
subscription.
If the bandwidth type is not available on the list, select Custom.
Enter the value to customize download bandwidth.
Enter the value to customize upload bandwidth.
Enter the value to provide bandwidth buffer.
Select custom。
Enter the value to 1600。
User can firstly set the value about 10% and adjust this value later. If your
network is very stable, you could lower this value.
47

Advertisement

Table of Contents
loading

Table of Contents