Table of Contents
Advertisement
Parameters
Detection Interval
Connection mode
Backup WAN
Load Balance Weight
Wait Time
External Connection Detection
Connection Detection Threshold The system will generate a PING packet to detect whether the
Detection time out
Detection Type
Description
Load balance detection interval. (seconds)
Choose Always on/Backup to define this WAN is for load balance
always on, or just for backup.
None
The priority is set from 1 to 10. "1" indicates the lowest priority, and "10"
indicates the highest. The system would route according to the ratio of
priority.
The time to re-send the request.(seconds)
Choose Enable/Disable to enable/disable connection detection.
connection is still connected. If the Host is not response for this
threshold value, the system is considered to be WAN lost.
How long Load balance detection will seems time out.
If gateway is chosen, the system will generate a PING packet to detect
20
Advertisement
Table of Contents
