Table of Contents
Advertisement
8. OPERATION
Adjusting the Balance
1) Press A-M button
~
and select "BAL"
2) Turning the Rotary knob
[j]
clockwise empha-
sizes the sound from the right speaker, turn-
ing it counterclockwise emphasizes the sound
from the left speaker
*
The factory default setting is "0" (Adjustment
range: L9 to R9)
3) When the adjustment is complete, press A-M
button
[gJ
several times until the function
mode is reached
Adjusting the Fader
1) Press A-M button
~
and select "FAD"
2) Turning the Rotary knob
[j]
clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers
*
The factory default setting is "0" (Adjustment
range: F9 to R9)
3) When the adjustment is complete, press A-M
button
rn
several times until the function
mode is reached
ping the engine of a car with its volume raised
to the maximum level may harm your hearing
Be careful about adjusting the volume
Note:
• Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 3 (unfold)
Basic Operations
Adjusting the Treble
1) Press A-M button
~
and select "TREB"
2) Turning the Rotary knob
[j]
clockwise empha-
sizes the treble, turning it counterclockwise
attenuates the treble
*
The factory default setting is "0" (Adjustment
range: -6 to +6)
3) When the adjustment is complete, press A-M
button
[gJ
several times until the function
mode is reached
Turning ON the Power and Adjusting
the Volume
1) Press the POWER button
~
*
To turn off the power, press the POWER button
[ID
for 1 second or longer
2) Press the FNC button
rn
and select another
operation mode Every time the FNC button
~
is pressed, the display changes the oper-
ation mode as
Radio
~
CD
~
CD changer
~
Radio
Notes:
• The operation mode not connected to the unit will not
be selected
• If
the CD mode is selected when no disc is inserted,
the display shows "NO DISC"
3) Turning the Rotary knob
[jlJ
clockwise
increases the volume; turning it counterclock-
wise decreases the volume
*
The volume level is from 0 (minimum) to 33 (max-
imum)
Audio Mode Adjustments
Press the A-M button
~
to select the adjustment
mode The mode switches as follows each time
the A-M button is pressed:
BASS
~
TREB
~
BAL
~
FAD
~
Previous
mode
Adjusting the Bass
1) Press A-M button
~
and select "BASS"
2) Turning the Rotary knob
[j]
clockwise empha-
sizes the bass, turning it counterclockwise
attenuates the bass
*
The factory default setting is "0" (Adjustment
range: -6 to +6)
3) When the adjustment is complete, press A-M
button
[gJ
several times until the function
mode is reached
Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored in memory Select the one you prefer
*
The factory default setting is "Z-EHCR OFF"
Each time you press Z-EHCR button
[1Q],
the
tone effect changes in the following order
"Z-ENHANCER 1"
~
"Z-ENHANCER 2"
~
"Z-ENHANCER 3"
~
"Z-EHCR OFF"
~
"Z-ENHANCER 1"
• Z-ENHANCER 1 bass emphasized
• Z-ENHANCER 2 treble emphasized
10
DX515
Advertisement
Table of Contents
