Table of Contents
Advertisement
j.)
Press the Party mode button twice on one of the PR-4Zs; both PR-4Zs should
now return to normal operation.
k.)
With the PR-4ZPG paging module connected to the zone 1 page input of one of
the PR-4Zs, initiate a page.
l.)
The page should be heard in all zones on both PR-4Zs other than the zone
where the page originated.
m.)
After the page is complete, all zones should return to their previous settings.
26) Video Test
a.)
Press the ALL ON button; all four zones should light up.
b.)
Set all four zones to Source 1.
d.)
Connect a CD player to the Source 1 video input, an amplifier to the Zone 1 video output
and speakers to the amplifier output.
e.)
Put Zone 1 on to Source 1. The CD should be playing through one speaker. Listen to the
left and right source inputs independently, then together.
f.)
Repeat steps 9a and 9b for all the source inputs.
c.)
Set the voltmeter to continuity (beep).
d.)
Test for contact between zone 1 video and Aux video. Test for no contact between zone
1 video and other video inputs.
e.)
Set zone 1 to source Video 2.
f.)
Test for contact between zone 1 video and Video 2. Test for no contact between zone 1
video and other video inputs. Test for no contact between zones 2, 3 and 4 and Video 2.
g.)
Set zone 1 to source Video 1.
h.)
Test for contact between zone 1 video and Video 1. Test for no contact between zone 1
video and other video inputs. Test for no contact between zones 2, 3 and 4 and Video 1.
i.)
Set zone 1 to source Aux.
j.)
Repeat steps 26d through 26I for zones 2, 3 and 4.
27) Memory Zone Lock Out
a.)
starting with zone 1, press the MEMORY button; the memory indicator will light.
b.)
Press the ALL ON button; no lights should turn on.
c.)
Press the MEMORY button.
d.)
Press the ALL OFF button.
e.)
Repeat steps 27a through 27d for zones 2, 3 and 4.
f.)
Press the ALL ON button; no lights should turn on.
g.)
Starting with zone 1, press the MEMORY button.
h.)
Press the PRESET button.
i.)
Press the MEMORY button.
j.)
Repeat steps 27g through 27i for zones2, 3 and 4.
k.)
Press the ALL ON button; all four zone indicator lights should turn on.
Hide quick links:
Advertisement
Table of Contents
