Russound PR-4Z Instruction Manual page 24

9) Sources
a.) Connect a CD player to the Source 1 input, an amplifier to the Zone 1 output and
speakers to the amplifier output.
b.) Put Zone 1 on to Source 1 (Tuner). The CD should be playing through the speakers.
Listen to the left and right source inputs independently, then together.
c.) Repeat steps 9a and 9b for all the source inputs.
10) ON/OFF
Play the CD player through the zone at a comfortable level. Turn off zone by pressing the
zone On/Off button on the front panel then turn it back on. The volume should be
completely muted while the zone is tuned off.
11) VOLUME UP/DOWN
Press Volume up, Volume should go up.
Press Volume Down, Volume should go down.
12) BASS UP/DOWN
Press Bass Down, bass should decrease.
Press Bass Up, bass should increase.
13) BASS FLAT
Press bass up several (12) times until bass is at full.
Press BASS UP and BASS DOWN at the same time. The bass level should drop down
to flat.
14) TREBLE UP/DOWN
Press Treble Down, Treble should decrease.
Press Treble Up, Treble should increase.
15) TREBLE FLAT
Press Treble up several (12) times until Treble is at full.
Press TREBLE UP and TREBLE DOWN at the same time. The Treble level should
drop down to flat.
16) LOUDNESS
Press the Loudness button until the loudness indicator is lit. At a volume level lower
than half volume there should be an audible enhancement of both bass and treble
when the Loudness indicator is lit. This enhancement should decrease in intensity as
the volume level increases.
17) Memory / Preset
a.) Starting with zone 1, select source input as "CD", Volume at half, Bass- at full,
Treble- at full, Loudness on. (Make sure audio can be heard)
b.) Press the Memory button; the memory indicator will light.