Ip Setup; Filter Sets (Firewalls); Ip Address Serving; Date And Time - Netopia R910 User Reference Manual

IP setup

These screens allow you to configure your network's use of IP.
I Details are given in
Filter sets (firewalls)
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
Details are given in
I

IP address serving

These screens allow you to configure IP address serving on your network by means of DHCP, WANIP, and BootP.
Details are given in
I

Date and time

You can set the system's date and time in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen
appears.
System Date Format:
Current Date (MM/DD/YY):
System Time Format:
Current Time:
AM or PM:
Follow these steps to set the system's date and time:
1. Select Current Date and enter the date in the appropriate format. Use one- or two-digit numbers for the
month and day, and the last two digits of the current year. The date's numbers must be separated by
forward slashes (/).
2. Select Current Time and enter the time in the format HH:MM, where HH is the hour (using either the
12-hour or 24-hour clock) and MM is the minutes.
Chapter 9, "IP Setup and Network Address Translation."
Chapter 13, "Security."
"IP address serving" on page
Set Date and Time
WAN and System Configuration 8-47
9-66.
MM/DD/YY
12/9/1998
AM/PM
04:18
PM