Netopia R910 User Reference Manual page 36

7-36 User's Reference Guide
A screen similar to the following Main Menu appears:
Your Baud Rate has been changed to 38400
You always start from this main screen.
If you do not see the Main Menu, verify that:
The computer used to view the console screen has its serial port connected to the Netopia R910's
I
Console port or an Ethernet connection to one of its Ethernet ports. See
your router" on page 6-33
I The Telnet or terminal emulation software is configured for the recommended values.
If you are connecting via the Console port, your computer's serial port is not being used by another device,
I
such as an internal modem, or an application. Turn off all other programs (other than your terminal
emulation program) that may be interfering with your access to the port.
I You have entered the correct password, if necessary. Your Netopia R910's console access may be
password protected from a previous configuration. See your system administrator to obtain the password.
See Appendix A, "Troubleshooting,"
Netopia R910 v4.8
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
or "Connecting through a Telnet session" on page
for more suggestions.
"Connecting a console cable to
6-32.