Table of Contents
Advertisement
Using Classic Networking (MacTCP)
1.
Go to the Apple Menu. Select Control Panels and then Network.
2.
In the Network window, select EtherTalk.
3.
Go back to the Apple menu. Select Control Panels and then MacTCP.
4.
Select EtherTalk.
From the pull-down menu under EtherTalk, select an available zone; then click the More button.
In the MacTCP/More window select the Server radio button. If necessary, fill in the Domain Name Server
Information given to you by your administrator.
5.
Restart the computer.
These are the only fields you need to modify in these screens.
Note: More information about configuring your Macintosh computer for TCP/IP connectivity through a Netopia
R910 can be found in Technote NIR_026, "Open Transport and Netopia Routers," located on the Netopia Web
site.
Configuring TCP/IP 5-29
Advertisement
Table of Contents
