Using A Bluetooth Wireless Headset (Optional) For Landline Calls - Panasonic KX-TGE463 Operating Instructions Manual

Using Bluetooth® Devices
Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R 1 headset can be paired to the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
2
Handset:
MMENUN#621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is other than
"0000", press MCLEARN, then enter your
headset PIN.
R Typically, default PIN is "0000". Refer
to the headset operating instructions.
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When the HEADSET indicator on the
base unit lights up, you are ready to
use the headset.
For assistance, please visit http://shop.panasonic.com/support
56
TGE46x47x(en)_1117_ver061.pdf
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
2
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
2
3
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Making landline calls with your
headset
Base unit
*1
1
2
3
56
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MOFFN
MMENUN#612
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
HEADSET indicator is turned off.
MOFFN
*1
KX-TGE470 series: page 4
Press your headset's button referring to
your headset operating instructions.
Dial the phone number using the base
unit after hearing the dial tone on your
headset.
When you finish talking, press your
headset's button referring to your headset
operating instructions.
2015/11/17 15:14:15