Panasonic KX-TGE463 Operating Instructions Manual page 61

you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 61).
This feature is only available for landline.
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
Storing a phone number to which the
unit makes an alert call
n From the phonebook:
1
MMENUN#338
2
MbN: "Notification to" a
MSELECTN a MADDN
3
MbN: "Phonebook" a MSELECTN
4
MbN: Select the desired phonebook
entry. a MSAVEN a MOFFN
n By entering a phone number:
1
MMENUN#338
2
MbN: "Notification to" a
MSELECTN a MADDN
3
MbN: "Manual" a MSELECTN
4
Enter the desired name (16 characters
max.). a MOKN
5
Enter the desired number (24 digits
max.). a MOKN a MSELECTN a
MOFFN
Turning on/off the new message alert
setting
1
MMENUN#338
2
MbN: "On/Off" a MSELECTN
3
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://shop.panasonic.com/support
TGE46x47x(en)_1117_ver061.pdf
Answering System for Landline
Editing the set phone number
1
2
3
4
5
Erasing the set phone number
1
2
3
4
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 62) to play the
new message from the new message alert
call. This is so that unauthorized parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code and then press 4 to play new
message.
1
2
3
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
61
MMENUN#338
MbN: "Notification to" a MSELECTN
MMENUN a MbN: "Edit" a MSELECTN
Edit the name if necessary (16 characters
max.). a MOKN
Edit the phone number if necessary (24
digits max.). a MOKN a MSELECTN a
MOFFN
MMENUN#338
MbN: "Notification to" a MSELECTN
MMENUN a MbN: "Erase" a MSELECTN
MbN: "Yes" a MSELECTN a MOFFN
R The new message alert setting is
turned off.
MMENUN#338
MbN: "Remote code" a MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
2015/11/17 15:14:16
61