The Handset - Panasonic KX-TGE463 Operating Instructions Manual

Cordless telephone with bluetooth and digital answering machine
Hide thumbs Also See for KX-TGE463:
Table of Contents

Advertisement

unit range. You can set the interval. The
default setting is "1 min".
Important:
R When 3 Bluetooth devices (2 cellular
phones and 1 headset) are paired to the
base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
1
MMENUN#632
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone's link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R After you disconnect a paired cellular
phone from the base unit manually, it will
automatically be connected to the base unit
in 30 minutes. If you do not use the link to
cell feature anymore, unpair the cellular
phone (page 18).
R A disconnected cellular phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
1
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
For assistance, please visit http://shop.panasonic.com/support
TGE46x47x(en)_1117_ver061.pdf
2
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
The default setting is "Off".
Important:
R If you turn on the "Cell line only
mode", disconnect the telephone line cord
from the base unit. Otherwise the "Cell
line only mode" cannot be activated.
1
2
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
– for the base unit, press MZN without
R Once you set this mode, the following
features cannot be used:
– Landline features (page 45)
– Answering system (page 58)
– Voicemail features (page 65)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
19
Link to Cell
MOFFN
MMENUN#157
To turn on:
MbN: "On" a MSELECTN a MbN: "Yes"
a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
instead of MCELLN (page 21).
pressing MCELL 1N or MCELL 2N set for
the cellular line selection (page 20,
27). (KX-TGE470 series: page 4)
Messages cannot be received.
phones or headset are disconnected. If
the auto connection is turned on
(page 18), the cellular phones are
reconnected.
will be displayed on the handset
momentarily. The handset can be used
once
is displayed.
2015/11/17
15:14:13
N or MZN
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg684skKx-tge474Kx-tge475Kx-tg654sk

Table of Contents