Accessing The Access Point Web Configurator - Atlantis Land A02-AP-W54 Quick Start Manual

1.9 Accessing the Access Point Web
Configurator
Before you configure this device, note that when the AP is
configured through an Ethernet connection, make sure the
manager PC must be set on same the IP network.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.1.100 (the factory-default
IP address setting) to the address location.
Click OK.
The screen will show the station summary of the AP when
you login to the AP.
There is no need to enter any password when
you first login the AP, the default setting is without
password. When there is a screen needs to enter
the Network password, it means that there is a
password settle, type in the password you
entered before.
Type a name or leave the username dialog box
empty to login, the system will check only the
password that was set in the system before.
1.9.1 Navigating
Configurator
There are six main functions included in the left side of the
main screen: Network, Security, Status, Clients, Tools and
Configuration. Point the selections in the left side of the
menu screen.
Wireless Multi-Function Access Point
the Access Point Web