Accessing The Access Point Web Configurator - Atlantis Land A02-AP-W54 Manual

3.3 Accessing the Access Point Web Configurator

Before you configure this device, note that when the AP is configured through an
Ethernet connection, make sure the manager PC must be set on same the IP
network.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.1.100 (the factory-default IP address setting) to
the address location.
Click OK.
The screen will show the station summary of the AP when you login to the AP.
There is no need to enter any password when you first login the AP, the
default setting is without password. When there is a screen needs to
enter the Network password, it means that there is a password settle,
type in the password you entered before.
Type a name or leave the username dialog box empty to login, the
system will check only the password that was set in the system before.
Wireless Multi-Function Access Point
A02-AP-W54 Pag. 14