Advertisement
Keyboard Function Keys for System Control
The usage of function keys depends on the supporting operating
system. To use the function keys, press and hold the Fn key while
pressing the appropriate function key (F2, F10, and the rest).
Function Keys
Icon
Key
Description
Fn
Fn
Function key
Fn + F2
standby mode
Fn + F3
Display switch - MTC / external display /
MTC+external display
Fn + F4
Brightness - decrease
Fn + F5
Brightness - increase
Fn + F6
Touch pad - on/off
Fn + F7
Speakers - on/off
Fn + F8
Volume - decrease
Fn + F9
Volume - increase
Fn + F10
Wireless - on/off
Fn + F11
3G Network (optional)
Fn + NumLk
Scroll lock - on/off
Scr Lk
Break
Fn + Pause
Break
Sys Rq
Fn + Insert
Sys Rq
Prt Sc
Fn + Delete
Bitmap of display copies to clipboard
Pg Up
Fn + Home
Page up
Pg Dn
Fn + End
Page down
Power Management
Proper power management should prolong the life of the battery
and enable the mobile thin client to run at a cooler temperature.
For information on the Power Save mode and maintaining the
battery, refer to your product's administrator guide.
Caution Statements
Improper connection or use of this product could result in
component failure or undesired interference. Read the following
caution statements before setting up and operating your mobile
thin client.
Setup
•
Do not force a connector into its socket. If any undue resistance
is encountered, ensure that the connector is correctly oriented
to the receptacle.
•
The main unit is not user serviceable; opening or accessing the
case may violate your warranty.
•
For wireless usage and requirements, refer to the regulatory
notices in the mobile thin client's documentation.
Venting and Care
•
Allow sufficient space around your mobile thin client for
ventilation; do not place your mobile thin client in any enclosure
that restricts airflow around the device, such as a closed
briefcase, while the computer is turned on. Restricting airflow
can overheat and damage your mobile thin client or cause a fire;
do not place any objects on the device or block the vent outlets.
Find environmental operating specifications at
http://www.wyse.com/products/hardware, click on your
hardware product, and then click Specifications tab.
•
Do not allow your mobile thin client to rest directly on exposed
skin for extended periods of time during operation. The base
surface temperature will rise during normal operation
(particularly when AC power is used). Prolonged contact with
exposed skin can cause discomfort or a burn.
•
To clean your mobile thin client, first disconnect it from the
electrical outlet, and then use a soft cloth dampened with water
for cleaning. Do not use liquid or aerosol cleaners.
Power Sources
•
Use only the external power supply that comes with your mobile
thin client. For power and voltage ratings, see the serial number
label or regulatory label on your device. For power adapter
replacement, contact your Wyse Service Representative. For
proper replacement compare the labels on both mobile thin
client and power adapter to ensure that their voltages match.
Use of any other power adapter may damage your mobile
thin client or the power adapter. The damage caused by an
improper power adapter is not covered by warranty.
•
You can connect the power adapter at any time with the mobile
thin client turned either on or off.
•
Do not hard reset your mobile thin client by holding down the
power button during normal operation.
•
When turning off your mobile thin client, be sure to perform a
complete shutdown (via the user interface). Do not disconnect
the AC power cable, DC power adapter cable, remove the
battery, or shut off power at a circuit breaker (including power
strips), etc., to turn off the device.
•
Surge protectors for electrical devices are recommended in
areas of lightning. However, when lightning is occurring, your
equipment should be properly shut down and unplugged from
AC power until the storm has passed.
Battery
•
The X class mobile thin clients contain a user-replaceable
battery pack that is designed to work with your product. Do not
use a battery from other mobile thin clients or laptop computers
with your mobile thin client. There is a risk of explosion if the
battery is replaced by an incorrect type. Replace the battery only
with a compatible battery purchased from a Wyse Authorized
Service Center. For service, visit
http://www.wyse.com/serviceandsupport/service/spares.asp.
For disposal of used batteries, follow local ordinance and/or
regulation.
Misuse of the battery pack may increase the risk of fire of
chemical burn. Do not puncture, incinerate, disassemble, or
expose the battery to temperatures above 65oC (149oF). Keep
the battery away from children. Handle damaged or leaking
batteries with extreme care. Damaged batteries may leak and
cause personal injury or equipment damage.
•
The X class mobile thin clients contain an internal button cell
battery replaceable by Wyse or one of our Authorized Service
Centers. For service, visit
http://www.wyse.com/serviceandsupport/service/spares.asp.
There is a risk of explosion if the battery is replaced by an
incorrect type. Always dispose of used batteries according to
the instructions accompanying the battery. Dispose of your
battery properly when it no longer holds a charge or is
damaged. Contact your local waste or environmental agency for
instructions.
Perchlorate Materials - Special Handling May Be Required
under California Code of Regulations, title 22. (Only required
within the U.S.A.)
3
Advertisement
