Wyse X90m7p Quick Start Manual

Quick-Start Guide
®
Wyse X Class Mobile Thin Client, Model Xn0m
Products: X00m, X50m, X90m7, X90m7p, X90mw
http://www.wyse.com/manuals
See accompanying documents in the shipping carton for License Agreement and Warranty information. To find the latest Quick-Start
Guide, go to http://www.wyse.com/manuals
Important: A printed copy of the Wyse Technology End User License Agreement is included in the shipping box and provided for your
reference only. The license at
using, or installing the software or the product, you agree to be bound by those terms.
Important: If you use Wyse Device Manager Server software for managing your Wyse cloud clients, download the latest version to
ensure compatibility at http://support.wyse.com/selfservice.html.
Caution: Improper connection, mounting, or use of this product could result in component failure and/or flash memory corruption. Read
Safety Guidelines before setting up and operating the cloud client.
Setting Up Your Mobile Thin Client
Be sure you have read the Safety Guidelines inside this document
before setting up and operating your mobile thin client.
1. Install the Battery
With your mobile thin client turned off, insert battery in the
battery compartment located on the underside of the mobile
thin client and secure it by sliding the latches.
Note: Fully charge/discharge your new battery up to four
cycles before achieving full capacity of the battery.
To Remove Battery - With your mobile thin client turned off
and disconnected from the power adapter, slide the battery
lock to unlock, and then slide and hold the battery release
latch to gently pull the battery out of the battery compartment.
2. Connect the Power Cable
Plug the power adapter connector to the mobile thin client as
shown. Plug the AC power cable to the power adapter, and
then plug the other end of the power cable to a wall outlet.
Note: You can connect the power adapter at any time with the
computer turned either on or off.
and click on the name of your cloud client.
http://www.wyse.com/license as of the purchase date is the controlling licensing agreement. By copying,
3. Turn On the Mobile Thin Client
Raise and adjust the lid, and press the power on/off button for
two seconds. When you release the power on/off button, the
power icon on the system indicators lights up.
To Turn Off the Mobile Thin Client - Press the power on/off
button, or go to Start > Shut Down and select Shut down.
Default User Names and Passwords
(Case Sensitive)
Wyse
SUSE Linux Enterprise
Administrator
User Name admin
Password admin
User
User Name thinuser
Password thinuser
* For administrators, log off User desktop while holding down the Shift key until the logon box
appears.
Windows- and Linux-Based Cloud Client - After turning on, the cloud client initially goes
through several boot sequence procedures before the operating system loads. Information
about setting up your server environment is available in the cloud client's documentation.
Cloud PC - WSM software is required; no operating system is installed, and therefore no
default user name and password are defined. Information about setting up your server
environment is available in the WSM documentation.
Making Connections
Your mobile thin client makes connections through:
•
Wired Network (LAN)
•
Wi-Fi
Information about connecting your mobile thin client to the
Internet is available in the product's administrator guide (X00m,
see WSM users guide).
®
Enhanced Microsoft
Standard 2009
administrator
Wyse#123
user
Wyse#123
® ®
Windows Embedded
* * *
/ 7 / 7p