Functions Of The Control Panel - Daewoo DWD-FT1081 Service Manual

6. FUNCTIONS OF THE CONTROL PANEL

Program selector
For switching the washing machine on and off and for selecting the programs.
You can select the course you want by rotating program selector.
For the more detailed information, please refer to the page 11~20.
Can be rotated in both direction.
You can turn off the power by rotating program selector to the direction at 12 o'clock.
Even if the program selector rotates while the program is running, the program is not
changed(except for off ).
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the 'Start/Hold' button → select the program that you want to change →
press the 'Start/Hold' button again.
Rinse+
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
• Rinse+ option is selectable with all programs except Rinse, Spin and Drain programs.
Rinse Hold
• This function leaves clothes in the machine suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold function is completed, use
program selector(Drain or Spin program).
• Rinse Hold option is selectable with all programs except Drain program.
Time Delay
• It can be used to pre-engage time for wash.
• Reservation can be made from 1 hours to 12 hours.
• Time Delay function is selectable with all programs.
Child Lock Mode
• Use this function when you want to protect any accident occurring from handling of
washer by a child.
• During an operation of washer, press 'Rinse+' and 'Rinse Hold' buttons
simultaneously.
• In Child Lock mode, no button functions except for off
• In Child Lock mode, press 'Rinse+' and 'Rinse Hold' buttons simultaneously like
setting Child Lock and Child Lock is cancelled.
• To change to the desired program, while in Child Lock mode;
1. Press both the 'Rinse+' and 'Rinse Hold' buttons together once again.
2. Press the Start/Hold button.
3. Select the desired program and press the Start/Hold button again.
• The Child Lock will be cancelled
when power is off .
.
Change the
desired
program
FUNCTIONS OF THE CONTROL PANEL 23