Wireless Setup - D-Link DVG-N5402GF User Manual

DVG-N5402GF User's Manual

3-1-3 Wireless Setup

This section instructs you how to setup your wireless network on the VoIP Router device.
Setup Hint:
1. Every device in the same wireless network must use the same SSID.
2. To avoid wireless network overlap, a specific and different channel is needed.
3. Make sure security used by every device in the same wireless network is compatible with the wireless
AP.
3-1-3-1 Wireless Basic
SETUP ->Wireless Setup -> Wireless Basic
Enable Wireless LAN Interface: Enable wireless basic settings on LAN interface.
Wireless Network Name (SSID): SSID is the name of your wireless network. All wireless-equipped devices
share the same SSID to communicate with each other. It must be unique to identify separated wireless
network. For security, you should change the default SSID to a special ID.
Wireless Channel: Select a clear and appropriate channel for your wireless network. A device on your
wireless network must use a specific channel to transmit and receive data. If wireless network has overlap,
change a different channel number.
802.11 Mode: The VoIP Router can operate in 2.4GHz ISM band with different speed of wireless
connection, Select the wireless band of your network.
802.11b only - Allow all 802.11b compliant wireless devices to associate with the wireless AP.
802.11g only - Allow all 802.11g compliant wireless devices to associate with the wireless AP.
D-Link Systems, Inc.
SETUP
28