Manual Wireless Network Setup - D-Link DIR-615/T User Manual

Section 3 - Coniguration
Enable Wireless:
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all wireless functions. Click Add
New to create your own time schedule to enable the wireless function.
Wireless
Service Set Identifier (SSID) is the name of your wireless network. Create
Network Name:
a name using up to 32 characters. The SSID is case-sensitive.
802.11 Mode:
Select one of the following:
802.11b Only - Select if all of your wireless clients are 802.11b.
802.11g Only - Select if all of your wireless clients are 802.11g.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11g and 802.11b - Select if you are using both 802.11b
and 802.11g wireless clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n
and 802.11g wireless clients.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix
of 802.11n, 11g, and 11b wireless clients.
Enable Auto
The Auto Channel Scan setting can be selected to allow the DIR-615
Channel Scan:
to choose the channel with the least amount of interference.
Wireless
Indicates the channel setting for the DIR-615. By default the channel
Channel:
is set to 6. The channel can be changed to fit the channel setting for
an existing wireless network or to customize the wireless network. If
you enable Auto Channel Scan, this option will be greyed out.
Transmission Select the transmission rate. It is strongly suggested to select Best
Rate: (Auto) for best performance.
Channel Width: Select the channel width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n
wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This
is the default setting.
D-Link DIR-615 User Manual

Manual Wireless Network Setup

23