Maintenance And Repairs - Faema BARCODE Use And Installation

11. Caution
Danger of burns
The areas marked with this sign become hot. Great
care should be taken when in the vicinity of these
areas.
GENERAL
The manufacturer disclaims all liability for damages to
items or persons due to improper use or due to the coffee
machine being used for reasons other than its intended
use.
Never work the coffee machine with wet hands or naked
feet.
Danger of Burns
Do not place the hands or parts of the body near the beverage
dispensing nozzle, or near the steam and hot water dispensing
wands.
Ensure that the machine is not handled by children or persons
who have not been instructed in its correct use.

12. Maintenance and Repairs

If the machine is not working properly, turn off the machine, turn
off the main off-on switch, and call the service center.
WARNING: Maintenance by unqualified people
can jeopardize the safety and conformity of the
machine.
Only use qualified, authorized technicians for
repairs.
Only use original spare parts guaranteed by the
manufacturer.
If original spare parts are not used, the manufac-
turer warranty will no longer be valid.
After maintenance, perform the installation
CHECK-UP as indicated in the specific section
of the user's manual.
WARNING
WARNING
WARNING: Hot surface
ACHTUNG: Heisse Oberfläche
ATTENTION: Surface chaude
ATTENZIONE: Superficie calda
Cup-warming plate
Place only coffee cups, cups and glasses to be used in
conjunction with the coffee machine on the cup-warming
plate.
Ensure that the coffee cups are completely drained before
placing them on the cup-warming plate.
No other objects shall be placed on the cup-warming plate.
MACHINE CLOSE-DOWN
When the machine remains unattended for
a long period of time (at night, during the
weekly closing day or during holidays) the
following operations shall be performed:
- Remove the plug or switch off the main
switch.
- Close the water tap.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions or damage to persons or
items.
If the power supply cord is damaged, switch off the machine
and request a replacement from the service center.
To ensure safety during operation, it is
absolutely necessary to:
- f o l l o w a l l t h e m a n u f a c t u r e r ' s
instructions;
- have qualified and authorized technicians
periodically check that all safety devices
are intact and functioning properly (the
first inspection within three years of
purchase and every year after that).
72