Symbol PDT 8056 Instruction Manual page 31

Q u i c k
Problem
Your terminal
does not accept
scan input.
R e f e r e n c e
Cause
Scanning
application is not
loaded.
Unreadable bar
code.
Distance between
exit window and bar
code is incorrect.
Terminal is not
programmed for the
bar code.
Terminal is not
programmed to
generate a beep.
Battery is low.
29
Solution
Verify that the unit is loaded with a
scanning application. See your
System Administrator.
Ensure the symbol is not defaced.
Ensure you are within proper scanning
range.
Ensure the terminal is programmed to
accept the type of bar code you are
scanning.
If you are expecting a beep on a good
decode and don't hear one, check that
the application is set to generate a
beep on good decode.
If the scanner stops emitting a laser
beam when you press the trigger,
check your battery level.
Note: If the scanner is still not reading
symbols, contact your distributor or
Symbol Technologies.