Symbol PDT 8056 Instruction Manual page 15

Q u i c k
3. Tap the center of each target that appears on the Calibration
screen with the tip of the stylus.
4. Follow the directions on the screen which explains how to
use the stylus and pop-up menus, and allows you to set your
city and time zone.
Note: To align your screen at anytime, press Shift + 2 to
launch the Calibration screen.
Initiating a Network Connection
Before using the terminal, set up the Spectrum24, GPRS (General
Packet Radio Service) or GSM (Global System for Mobile
Communication) network connection. Refer to the PDT 8000
Series Product Reference Guide for setup instructions.
R e f e r e n c e
13