Symbol PDT 8056 Instruction Manual page 30

P D T
Problem
A message
appears stating
that your
terminal's
memory is full.
Fail to
communicate with
IrDA printer.
When receiving
beamed data an
out of memory
message
appears.
Beamed data
does not transmit.
8 0 X X
Cause
Too many files
stored on the
terminal.
Memory allocation
too low.
Too many
applications
installed on the
terminal.
Distance from
printer is between 5
inches and 39
inches.
Obstruction
interfered with
communication.
Application is not
enabled to run IrDA
printing.
Not enough free
memory available
for receiving data.
Terminals too close
together or too far
apart.
Insufficient room
lighting.
W W A N
Solution
Delete unused memos and records.
You can save these records on your
computer.
Adjust the memory allocation. Select
Start, then Settings, and select the
System tab. Tap Memory and adjust
the slider.
If you have installed additional
applications on your terminal, remove
them to recover memory. Select Start,
then Settings, and select the System
tab. Tap Remove Programs, select
the unused program and tap Remove.
Bring the terminal closer to the printer
or move it further away and attempt
communications again.
Check the path to ensure no objects
were in the way.
Printer support must be included with
the application to run IrDA printing on
the terminal. See your System
Administrator.
Your terminal requires at least twice
the amount of memory available as
the data you are receiving. For
example, if you are receiving a 30K
application, you must have at least
60K free.
Confirm that the terminals are at least
5 inches and at most 39 inches apart.
Also ensure that there is a clear path
between the two devices.
Adjust the room lighting or move to a
different location.
28