Menu Column; Video Displaying Area - Aztech wipc403 User Manual

Wireless n pan/tilt ip camera
Table of Contents

Advertisement

AZTECH
WIPC403 IP CAMERA USER MANUAL v1.0

5.2.1 Menu Column

When you click on the Settings Icon, It will take you to the Settings Page. There are 2 kinds of
menu, one is Main Menu, the other is Sub Menu. The Main Menu is highlighted in red
background including Device Basic Information, Network Configuration, Alarm Service
Settings, User and Device Management; SubMenu lies below the Main Menu.

5.2.2 Video Displaying Area

The video displaying area corresponds to the resolution, the higher the resolution is, the
larger the displaying area will be. If motion detection was set, when it has detected any
movements of the certain area, it will show a pane to call user's attention.
Figure 8 is status column at the bottom of video displaying area.
1)
Audio Button: Click it to play the audio getting from IP Camera, click it again, it will
disable this function.
2)
Talk Button: Click it, and the stereo equipment which was connected to the IP Camera
will play the achieved audio. Click it again, the speaker will stop playing.
3) If user has clicked the "Record" button in the Figure 8, means the video is being
recorded. If click the "Record" button again, it will stop recording.
4) If user has clicked the "Photo" button in the Figure 8, means it captured a photo and will
redirect to the photo page.
5) If user has clicked the "Settings" button, it will redirect to the Settings Homepage.
Figure 7
Figure 8
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents