Page 1
AZTECH Aztech WIPC402 IP Camera Frequently Asked Questions (FAQs) How to connect WIPC402 to Wireless? ………………………….. How to save snaphots and video clips on the SD Card and FTP Server for Alarm Notification? ……………………………………….. How to Configure Email Settings for Alarm Notification? …. 9 How to Configure Schedule for Alarm Notification? ………...
Page 2
AZTECH How to connect WIPC402 to Wireless? 1. Open the Resource CD Provided in the package, and run the WIPC402 Utility (V2.0.1.8). a) Click the Search Button b) Select the WIPC402 Camera c) Click Browse...
Page 3
AZTECH 2. On the WIPC402 Web UI, enter the Username and Password. (Default value is admin) 3. Click Sign in for Browser You will be asked to install ActiveX Plug-ins, just click allow to enable it.
Page 4
AZTECH 4. On the Web User Interface, Selec t on the Network Menu on top, WiFi Sub Menu at the right column. Click on ‘Enable’ Wireless. Then Choose the Apply Button. 5. Search for the existing SSID / Home Network where the camera will connect.
Page 5
AZTECH Click Join. 6. Enter the key/ password. Then click Apply.
Page 6
AZTECH 7. You may now disconnect the LAN Cable from the IP Camera. 8. Also, unplug and Plug-in the Power Adapter for the device to reboot. 9. Wait for about two (2) minutes until the right LED Indicator in front of the camera turns to...
SD Card and FTP Server for Alarm Notification? 1. On the WIPC402 Web User Interface, select on the Alarm Menu, Motion Detection Sub Menu (found at the right column). 2. Ensure that the motion detection is enabled. You may select on the four (4) windows to...
Page 8
AZTECH 3. Go to to Alarm sub menu (found at the right column) and select / click • Save Picture on the SD Card • Save Video on the SD Card • Save Video on the FTP Server *Please ensure that SD Card is inserted on the device before turning the Power ON.
Page 9
How to Configure Email Settings for Alarm Notification? 1. On the WIPC402 Web User Interface, select on the Alarm Menu, and Alarm Sub Menu (found at the right column). Click on the Email Alarm box. You may also check on the Send with Picture Option.
Page 10
How to Configure Schedule for Alarm Notification? 1. On the WIPC402 Web User Interface, select on the Alarm Menu, and Schedule Sub Menu (found at the right column). You can set it in three (3) ways: a) Using the Week Mode – in this setting you may enable alarm schedule on a daily basis from Sunday to Monday (top to bottom found at the leftmost corner).
Page 11
AZTECH c) All times – in this setting you may enable alarm schedule at all times. Click Apply once finished.
Page 12
AZTECH How to Configure using MAC OS? 1. Download and install Device Finder Software at Aztech Support Website and Follow procedure below. 2. Launch the Application. 3. Search for the camera in the device list and click Login.
Page 13
AZTECH 4. It will now take you to the browser to sign-in. Input the username / password that is admin / admin by default. 5. After authentication you may now view the camera.
Page 14
AZTECH Take note that to view using other browsers (e.g. Safari on MAC), you must enable below, Please check the User Manual for more details.