Restarting The Network - NETGEAR RangeMax WPN824 Reference Manual

Reference Manual for the RangeMax Wireless Router WPN824

Restarting the Network

Once you've set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your WPN824 router, you are ready to access and
configure the firewall.
Preparing Your Network C-23
202-10072-01, March 2005