The Router's Rear Panel - NETGEAR RangeMax WPN824 Reference Manual

You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity
Power On Green Solid
Off
Test On
Off
Wireless On
Off
Internet On
Blink
LAN On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off

The Router's Rear Panel

The rear panel of the WPN824 router contains the items listed below.
4
Power
Figure 1-2: WPN824 Rear Panel
Introduction
Reference Manual for the RangeMax Wireless Router WPN824
Description
Power is supplied and the router it has passed its diagnostic test.
Power is not supplied to the router.
The unit is performing the power on self test diagnostic.
The unit successfully completed the power on self test diagnostic.
The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
1
3 2
4 LAN Ports Internet Port
202-10072-01, March 2005
LEDs to show which
antenna is on
Reset
Seven integrated
Button
antennas inside
2-7