Restarting The Network - NETGEAR Wireless Router Setup Manual

Reference Manual for the 54 Mbps Wireless Router WGR614 v5

Restarting the Network

Once you've set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your WGR614 v5 router, you are ready to access and
configure the firewall.
Preparing Your Network B-23
July 2004 202-10036-01