Configuring The Macintosh For Tcp/Ip Networking; Macos 8.6 Or 9.X; Macos X - NETGEAR RangeMax WPN824 Reference Manual

Reference Manual for the RangeMax Wireless Router WPN824
• The default gateway is 192.168.1.1
Type
4.
exit

Configuring the Macintosh for TCP/IP Networking

Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On
each networked Macintosh, you will need to configure TCP/IP to use DHCP.

MacOS 8.6 or 9.x

From the Apple menu, select Control Panels, then TCP/IP.
1.
The TCP/IP Control Panel opens:
From the "Connect via" box, select your Macintosh's Ethernet interface.
2.
From the "Configure" box, select Using DHCP Server.
3.
You can leave the DHCP Client ID box empty.
Close the TCP/IP Control Panel.
4.
Repeat this for each Macintosh on your network.
5.

MacOS X

From the Apple menu, choose System Preferences, then Network.
1.
C-18
202-10072-01, March 2005
Preparing Your Network