Using The Router As A Dhcp Server - NETGEAR RangeMax WPN824 Reference Manual

Netgear wireless router reference manual
Hide thumbs Also See for RangeMax WPN824:
Table of Contents

Advertisement

Note: If you change the LAN IP address of the router while connected through the
browser, you will be disconnected. You must then open a new connection to the new IP
address and log in again.

Using the Router as a DHCP server

By default, the router will function as a DHCP (Dynamic Host Configuration Protocol) server,
allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to
the router's LAN. The assigned default gateway address is the LAN address of the router. IP
addresses will be assigned to the attached computers from a pool of addresses specified in this
menu. Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. See
Configuration by
DHCP" on
assign IP addresses for your network.
If another device on your network will be the DHCP server, or if you will manually configure the
network settings of all of your computers, clear the 'Use router as DHCP server' check box.
Otherwise, leave it checked.
Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP
Address. These addresses should be part of the same IP address subnet as the router's LAN IP
address. Using the default addressing scheme, you should define a range between 192.168.1.2 and
192.168.1.253, although you may wish to save part of the range for devices with fixed addresses.
The router will deliver the following parameters to any LAN device that requests DHCP:
An IP Address from the range you have defined
Subnet Mask
Gateway IP Address (the router's LAN IP address)
Primary DNS Server (if you entered a Primary DNS address in the Basic Settings menu;
otherwise, the router's LAN IP address)
Secondary DNS Server (if you entered a Secondary DNS address in the Basic Settings menu
Advanced Configuration of the Router
Reference Manual for the RangeMax Wireless Router WPN824
page B-10
for an explanation of DHCP and information about how to
202-10072-01, March 2005
"IP
8-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents