Boiler Assembly - Wolf ComfortLine CHK Installation And Maintenance Instructions Manual

Boiler
• Install the plinth or the DHW
cylinder in accordance with the
enclosed installation instructions.
• Position the boiler with adjustab-
le bolts fully inserted using the
lifting slings on the fully assembled
plinth or DHW cylinder.
• To secure the boiler to the plinth
or DHW cylinder, tapped holes are
provided at the front sides of the
boiler. Additional fixings are not
required.
• Check the horizontal level of the
boiler together with the plinth and
DHW cylinder and adjust, with a
slight incline to the rear, if necessary.
Secure the boiler door
with the four M10x45 screws and
washers supplied.
Insert the door hinge pins into the
door bracket on the l.h. or r.h. side,
subject to door opening.
Position the thermal boiler
insulation
around the boiler (overlapping) and
secure with spring clips.
Position the thermal boiler insula-
tion for the boiler back over the rear
connections and on the back wall of
the boiler.
12

Boiler assembly

Screws for securing the boiler to the plinth
Fixing screws on the DHW cylinder
Boiler door installation
Screws for securing the boiler
Screws for securing the boiler
M10x45 screws
3060918_1203