Boiler Assembly - Wolf ComfortLine Series Installation And Maintenance Instructions Manual

Boiler assembly

Boiler
1
• Install the plinth or the DHW cylinder
in accordance with the enclosed
installation instructions.
• Position the boiler with adjustable
bolts fully inserted using the
lifting slings on the fully assembled
plinth or DHW cylinder.
• To secure the boiler to the plinth or
DHW cylinder, tapped holes are
provided at the front sides of the
boiler. Additional fixings are not
required.
• Check the horizontal level of the
boiler together with the plinth and
DHW cylinder and adjust, with a slight
incline to the rear, if necessary.
2 Position the thermal boiler insulation
around the boiler (overlapping) and secure
with spring clips.
3 Position the thermal insulation for the
boiler back
over the rear connections and on the
back wall of the boiler.
4 Position the thermal insulation for the
boiler front
loosely on the boiler
1 2
Screws for securing the boiler
Screws for securing the boiler to the plinth
Screws for securing the boiler
Fixing screws on the DHW cylinder